Expand description
This is a library for controlling colours and formatting, such as red bold text or blue underlined text, on ANSI terminals.
Basic usage
There are three main types in this crate that you need to be
concerned with: ANSIString, Style, and Colour.
A Style holds stylistic information: foreground and background colours,
whether the text should be bold, or blinking, or other properties. The
Colour enum represents the available colours. And an ANSIString is a
string paired with a Style.
Color is also available as an alias to Colour.
To format a string, call the paint method on a Style or a Colour,
passing in the string you want to format as the argument. For example,
here’s how to get some red text:
use ansi_term::Colour::Red;
println!("This is in red: {}", Red.paint("a red string"));It’s important to note that the paint method does not actually return a
string with the ANSI control characters surrounding it. Instead, it returns
an ANSIString value that has a Display implementation that, when
formatted, returns the characters. This allows strings to be printed with a
minimum of String allocations being performed behind the scenes.
If you do want to get at the escape codes, then you can convert the
ANSIString to a string as you would any other Display value:
use ansi_term::Colour::Red;
let red_string = Red.paint("a red string").to_string();Bold, underline, background, and other styles
For anything more complex than plain foreground colour changes, you need to
construct Style values themselves, rather than beginning with a Colour.
You can do this by chaining methods based on a new Style, created with
Style::new(). Each method creates a new style that has that specific
property set. For example:
use ansi_term::Style;
println!("How about some {} and {}?",
Style::new().bold().paint("bold"),
Style::new().underline().paint("underline"));For brevity, these methods have also been implemented for Colour values,
so you can give your styles a foreground colour without having to begin with
an empty Style value:
use ansi_term::Colour::{Blue, Yellow};
println!("Demonstrating {} and {}!",
Blue.bold().paint("blue bold"),
Yellow.underline().paint("yellow underline"));
println!("Yellow on blue: {}", Yellow.on(Blue).paint("wow!"));The complete list of styles you can use are: bold, dimmed, italic,
underline, blink, reverse, hidden, strikethrough, and on for
background colours.
In some cases, you may find it easier to change the foreground on an
existing Style rather than starting from the appropriate Colour.
You can do this using the fg method:
use ansi_term::Style;
use ansi_term::Colour::{Blue, Cyan, Yellow};
println!("Yellow on blue: {}", Style::new().on(Blue).fg(Yellow).paint("yow!"));
println!("Also yellow on blue: {}", Cyan.on(Blue).fg(Yellow).paint("zow!"));You can turn a Colour into a Style with the normal method.
This will produce the exact same ANSIString as if you just used the
paint method on the Colour directly, but it’s useful in certain cases:
for example, you may have a method that returns Styles, and need to
represent both the “red bold” and “red, but not bold” styles with values of
the same type. The Style struct also has a Default implementation if you
want to have a style with nothing set.
use ansi_term::Style;
use ansi_term::Colour::Red;
Red.normal().paint("yet another red string");
Style::default().paint("a completely regular string");Extended colours
You can access the extended range of 256 colours by using the Colour::Fixed
variant, which takes an argument of the colour number to use. This can be
included wherever you would use a Colour:
use ansi_term::Colour::Fixed;
Fixed(134).paint("A sort of light purple");
Fixed(221).on(Fixed(124)).paint("Mustard in the ketchup");The first sixteen of these values are the same as the normal and bold
standard colour variants. There’s nothing stopping you from using these as
Fixed colours instead, but there’s nothing to be gained by doing so
either.
You can also access full 24-bit colour by using the Colour::RGB variant,
which takes separate u8 arguments for red, green, and blue:
use ansi_term::Colour::RGB;
RGB(70, 130, 180).paint("Steel blue");Combining successive coloured strings
The benefit of writing ANSI escape codes to the terminal is that they stack: you do not need to end every coloured string with a reset code if the text that follows it is of a similar style. For example, if you want to have some blue text followed by some blue bold text, it’s possible to send the ANSI code for blue, followed by the ANSI code for bold, and finishing with a reset code without having to have an extra one between the two strings.
This crate can optimise the ANSI codes that get printed in situations like
this, making life easier for your terminal renderer. The ANSIStrings
type takes a slice of several ANSIString values, and will iterate over
each of them, printing only the codes for the styles that need to be updated
as part of its formatting routine.
The following code snippet uses this to enclose a binary number displayed in red bold text inside some red, but not bold, brackets:
use ansi_term::Colour::Red;
use ansi_term::{ANSIString, ANSIStrings};
let some_value = format!("{:b}", 42);
let strings: &[ANSIString<'static>] = &[
Red.paint("["),
Red.bold().paint(some_value),
Red.paint("]"),
];
println!("Value: {}", ANSIStrings(strings));There are several things to note here. Firstly, the paint method can take
either an owned String or a borrowed &str. Internally, an ANSIString
holds a copy-on-write (Cow) string value to deal with both owned and
borrowed strings at the same time. This is used here to display a String,
the result of the format! call, using the same mechanism as some
statically-available &str slices. Secondly, that the ANSIStrings value
works in the same way as its singular counterpart, with a Display
implementation that only performs the formatting when required.
Byte strings
This library also supports formatting \[u8] byte strings; this supports
applications working with text in an unknown encoding. Style and
Colour support painting \[u8] values, resulting in an ANSIByteString.
This type does not implement Display, as it may not contain UTF-8, but
it does provide a method write_to to write the result to any value that
implements Write:
use ansi_term::Colour::Green;
Green.paint("user data".as_bytes()).write_to(&mut std::io::stdout()).unwrap();Similarly, the type ANSIByteStrings supports writing a list of
ANSIByteString values with minimal escape sequences:
use ansi_term::Colour::Green;
use ansi_term::ANSIByteStrings;
ANSIByteStrings(&[
Green.paint("user data 1\n".as_bytes()),
Green.bold().paint("user data 2\n".as_bytes()),
]).write_to(&mut std::io::stdout()).unwrap();Structs
ANSIGenericString includes a generic string type and a Style to
display that string. ANSIString and ANSIByteString are aliases for
this type on str and \[u8], respectively.ANSIGenericStrings collected together, in order to be
written with a minimum of control characters.ANSIString, but only displays the difference between two
styles.ANSIString, but only displays the style prefix.ANSIString, but only displays the style suffix.Enums
Functions
ANSIByteStrings instance.ANSIStrings instance.strs without the formatting, as an allocated String.unstyle(strs).len().Type Definitions
ANSIByteString represents a formatted series of bytes. Use
ANSIByteString when styling text with an unknown encoding.ANSIByteStrings collected together, in order to be
written with a minimum of control characters.Style to display it
in a terminal.ANSIStrings collected together, in order to be written with a
minimum of control characters.