Struct orml_unknown_tokens::module::Pallet
source · pub struct Pallet<T>(_);Expand description
The pallet implementing the on-chain logic.
Implementations§
source§impl<T: Config> Pallet<T>
impl<T: Config> Pallet<T>
sourcepub fn concrete_fungible_balances<KArg1, KArg2>(k1: KArg1, k2: KArg2) -> u128where
KArg1: EncodeLike<MultiLocation>,
KArg2: EncodeLike<MultiLocation>,
pub fn concrete_fungible_balances<KArg1, KArg2>(k1: KArg1, k2: KArg2) -> u128where
KArg1: EncodeLike<MultiLocation>,
KArg2: EncodeLike<MultiLocation>,
Concrete fungible balances under a given location and a concrete fungible id.
double_map: who, asset_id => u128
source§impl<T: Config> Pallet<T>
impl<T: Config> Pallet<T>
sourcepub fn abstract_fungible_balances<KArg1, KArg2>(k1: KArg1, k2: KArg2) -> u128where
KArg1: EncodeLike<MultiLocation>,
KArg2: EncodeLike<Vec<u8>>,
pub fn abstract_fungible_balances<KArg1, KArg2>(k1: KArg1, k2: KArg2) -> u128where
KArg1: EncodeLike<MultiLocation>,
KArg2: EncodeLike<Vec<u8>>,
Abstract fungible balances under a given location and a abstract fungible id.
double_map: who, asset_id => u128
Trait Implementations§
source§impl<T: Config> GetStorageVersion for Pallet<T>
impl<T: Config> GetStorageVersion for Pallet<T>
source§fn current_storage_version() -> StorageVersion
fn current_storage_version() -> StorageVersion
Returns the current storage version as supported by the pallet.
source§fn on_chain_storage_version() -> StorageVersion
fn on_chain_storage_version() -> StorageVersion
Returns the on-chain storage version of the pallet as stored in the storage.
source§impl<T: Config> Hooks<<T as Config>::BlockNumber> for Pallet<T>
impl<T: Config> Hooks<<T as Config>::BlockNumber> for Pallet<T>
source§fn on_finalize(_n: BlockNumber)
fn on_finalize(_n: BlockNumber)
The block is being finalized. Implement to have something happen.
source§fn on_idle(_n: BlockNumber, _remaining_weight: Weight) -> Weight
fn on_idle(_n: BlockNumber, _remaining_weight: Weight) -> Weight
This will be run when the block is being finalized (before
on_finalize).
Implement to have something happen using the remaining weight.
Will not fire if the remaining weight is 0.
Return the weight used, the hook will subtract it from current weight used
and pass the result to the next on_idle hook if it exists. Read moresource§fn on_initialize(_n: BlockNumber) -> Weight
fn on_initialize(_n: BlockNumber) -> Weight
The block is being initialized. Implement to have something happen. Read more
source§fn on_runtime_upgrade() -> Weight
fn on_runtime_upgrade() -> Weight
Perform a module upgrade. Read more
source§fn try_state(_n: BlockNumber) -> Result<(), &'static str>
fn try_state(_n: BlockNumber) -> Result<(), &'static str>
Execute the sanity checks of this pallet, per block. Read more
source§fn pre_upgrade() -> Result<(), &'static str>
fn pre_upgrade() -> Result<(), &'static str>
Execute some pre-checks prior to a runtime upgrade. Read more
source§fn post_upgrade() -> Result<(), &'static str>
fn post_upgrade() -> Result<(), &'static str>
Execute some post-checks after a runtime upgrade. Read more
source§fn offchain_worker(_n: BlockNumber)
fn offchain_worker(_n: BlockNumber)
Implementing this function on a module allows you to perform long-running tasks
that make (by default) validators generate transactions that feed results
of those long-running computations back on chain. Read more
source§fn integrity_test()
fn integrity_test()
Run integrity test. Read more
source§impl<T: Config> IntegrityTest for Pallet<T>
impl<T: Config> IntegrityTest for Pallet<T>
source§fn integrity_test()
fn integrity_test()
Run integrity test. Read more
source§impl<T: Config> OffchainWorker<<T as Config>::BlockNumber> for Pallet<T>
impl<T: Config> OffchainWorker<<T as Config>::BlockNumber> for Pallet<T>
source§fn offchain_worker(n: <T as Config>::BlockNumber)
fn offchain_worker(n: <T as Config>::BlockNumber)
This function is being called after every block import (when fully synced). Read more
source§impl<T: Config> OnFinalize<<T as Config>::BlockNumber> for Pallet<T>
impl<T: Config> OnFinalize<<T as Config>::BlockNumber> for Pallet<T>
source§fn on_finalize(n: <T as Config>::BlockNumber)
fn on_finalize(n: <T as Config>::BlockNumber)
The block is being finalized. Implement to have something happen. Read more
source§impl<T: Config> OnGenesis for Pallet<T>
impl<T: Config> OnGenesis for Pallet<T>
source§fn on_genesis()
fn on_genesis()
Something that should happen at genesis.
source§impl<T: Config> OnIdle<<T as Config>::BlockNumber> for Pallet<T>
impl<T: Config> OnIdle<<T as Config>::BlockNumber> for Pallet<T>
source§fn on_idle(n: <T as Config>::BlockNumber, remaining_weight: Weight) -> Weight
fn on_idle(n: <T as Config>::BlockNumber, remaining_weight: Weight) -> Weight
The block is being finalized.
Implement to have something happen in case there is leftover weight.
Check the passed
remaining_weight to make sure it is high enough to allow for
your pallet’s extra computation. Read moresource§impl<T: Config> OnInitialize<<T as Config>::BlockNumber> for Pallet<T>
impl<T: Config> OnInitialize<<T as Config>::BlockNumber> for Pallet<T>
source§fn on_initialize(n: <T as Config>::BlockNumber) -> Weight
fn on_initialize(n: <T as Config>::BlockNumber) -> Weight
The block is being initialized. Implement to have something happen. Read more
source§impl<T: Config> OnRuntimeUpgrade for Pallet<T>
impl<T: Config> OnRuntimeUpgrade for Pallet<T>
source§impl<T: Config> PalletInfoAccess for Pallet<T>
impl<T: Config> PalletInfoAccess for Pallet<T>
source§fn module_name() -> &'static str
fn module_name() -> &'static str
Name of the Rust module containing the pallet.
source§fn crate_version() -> CrateVersion
fn crate_version() -> CrateVersion
Version of the crate containing the pallet.
source§impl<T: Config> PalletsInfoAccess for Pallet<T>
impl<T: Config> PalletsInfoAccess for Pallet<T>
source§impl<T: Config> StorageInfoTrait for Pallet<T>
impl<T: Config> StorageInfoTrait for Pallet<T>
fn storage_info() -> Vec<StorageInfo> ⓘ
source§impl<T: Config> TryState<<T as Config>::BlockNumber> for Pallet<T>
impl<T: Config> TryState<<T as Config>::BlockNumber> for Pallet<T>
source§fn try_state(
n: <T as Config>::BlockNumber,
_s: TryStateSelect
) -> Result<(), &'static str>
fn try_state(
n: <T as Config>::BlockNumber,
_s: TryStateSelect
) -> Result<(), &'static str>
Execute the state checks.
source§impl<T: Config> UnknownAsset for Pallet<T>
impl<T: Config> UnknownAsset for Pallet<T>
source§fn deposit(asset: &MultiAsset, to: &MultiLocation) -> DispatchResult
fn deposit(asset: &MultiAsset, to: &MultiLocation) -> DispatchResult
Deposit unknown asset.
source§fn withdraw(asset: &MultiAsset, from: &MultiLocation) -> DispatchResult
fn withdraw(asset: &MultiAsset, from: &MultiLocation) -> DispatchResult
Withdraw unknown asset.
impl<T> Eq for Pallet<T>
Auto Trait Implementations§
impl<T> RefUnwindSafe for Pallet<T>where
T: RefUnwindSafe,
impl<T> Send for Pallet<T>where
T: Send,
impl<T> Sync for Pallet<T>where
T: Sync,
impl<T> Unpin for Pallet<T>where
T: Unpin,
impl<T> UnwindSafe for Pallet<T>where
T: UnwindSafe,
Blanket Implementations§
source§impl<T> CheckedConversion for T
impl<T> CheckedConversion for T
source§impl<T> Downcast for Twhere
T: Any,
impl<T> Downcast for Twhere
T: Any,
source§fn into_any(self: Box<T, Global>) -> Box<dyn Any + 'static, Global>
fn into_any(self: Box<T, Global>) -> Box<dyn Any + 'static, Global>
Convert
Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can
then be further downcast into Box<ConcreteType> where ConcreteType implements Trait. Read moresource§fn into_any_rc(self: Rc<T>) -> Rc<dyn Any + 'static>
fn into_any_rc(self: Rc<T>) -> Rc<dyn Any + 'static>
Convert
Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be
further downcast into Rc<ConcreteType> where ConcreteType implements Trait. Read moresource§fn as_any(&self) -> &(dyn Any + 'static)
fn as_any(&self) -> &(dyn Any + 'static)
Convert
&Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot
generate &Any’s vtable from &Trait’s. Read moresource§fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
Convert
&mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot
generate &mut Any’s vtable from &mut Trait’s. Read moresource§impl<Q, K> Equivalent<K> for Qwhere
Q: Eq + ?Sized,
K: Borrow<Q> + ?Sized,
impl<Q, K> Equivalent<K> for Qwhere
Q: Eq + ?Sized,
K: Borrow<Q> + ?Sized,
source§fn equivalent(&self, key: &K) -> bool
fn equivalent(&self, key: &K) -> bool
Compare self to
key and return true if they are equal.source§impl<T> FmtForward for T
impl<T> FmtForward for T
source§fn fmt_binary(self) -> FmtBinary<Self>where
Self: Binary,
fn fmt_binary(self) -> FmtBinary<Self>where
Self: Binary,
source§fn fmt_display(self) -> FmtDisplay<Self>where
Self: Display,
fn fmt_display(self) -> FmtDisplay<Self>where
Self: Display,
source§fn fmt_lower_exp(self) -> FmtLowerExp<Self>where
Self: LowerExp,
fn fmt_lower_exp(self) -> FmtLowerExp<Self>where
Self: LowerExp,
source§fn fmt_lower_hex(self) -> FmtLowerHex<Self>where
Self: LowerHex,
fn fmt_lower_hex(self) -> FmtLowerHex<Self>where
Self: LowerHex,
source§fn fmt_pointer(self) -> FmtPointer<Self>where
Self: Pointer,
fn fmt_pointer(self) -> FmtPointer<Self>where
Self: Pointer,
source§fn fmt_upper_exp(self) -> FmtUpperExp<Self>where
Self: UpperExp,
fn fmt_upper_exp(self) -> FmtUpperExp<Self>where
Self: UpperExp,
source§fn fmt_upper_hex(self) -> FmtUpperHex<Self>where
Self: UpperHex,
fn fmt_upper_hex(self) -> FmtUpperHex<Self>where
Self: UpperHex,
source§impl<T> Instrument for T
impl<T> Instrument for T
source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
source§impl<T, Outer> IsWrappedBy<Outer> for Twhere
Outer: AsRef<T> + AsMut<T> + From<T>,
T: From<Outer>,
impl<T, Outer> IsWrappedBy<Outer> for Twhere
Outer: AsRef<T> + AsMut<T> + From<T>,
T: From<Outer>,
source§impl<U> OnRuntimeUpgradeHelpersExt for Uwhere
U: OnRuntimeUpgrade,
impl<U> OnRuntimeUpgradeHelpersExt for Uwhere
U: OnRuntimeUpgrade,
source§fn storage_key(ident: &str) -> [u8; 32]
fn storage_key(ident: &str) -> [u8; 32]
Generate a storage key unique to this runtime upgrade. Read more
source§fn get_temp_storage<T>(at: &str) -> Option<T>where
T: Decode,
fn get_temp_storage<T>(at: &str) -> Option<T>where
T: Decode,
Get temporary storage data written by
Self::set_temp_storage. Read moresource§fn set_temp_storage<T>(data: T, at: &str)where
T: Encode,
fn set_temp_storage<T>(data: T, at: &str)where
T: Encode,
Write some temporary data to a specific storage that can be read (potentially in
post-upgrade hook) via
Self::get_temp_storage. Read moresource§impl<T> PalletVersionToStorageVersionHelper for Twhere
T: GetStorageVersion + PalletInfoAccess,
impl<T> PalletVersionToStorageVersionHelper for Twhere
T: GetStorageVersion + PalletInfoAccess,
fn migrate(db_weight: &RuntimeDbWeight) -> Weight
source§impl<T> Pipe for Twhere
T: ?Sized,
impl<T> Pipe for Twhere
T: ?Sized,
source§fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere
Self: Sized,
fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere
Self: Sized,
Pipes by value. This is generally the method you want to use. Read more
source§fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,
Borrows
self and passes that borrow into the pipe function. Read moresource§fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,
Mutably borrows
self and passes that borrow into the pipe function. Read moresource§fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> Rwhere
Self: Borrow<B>,
B: 'a + ?Sized,
R: 'a,
fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> Rwhere
Self: Borrow<B>,
B: 'a + ?Sized,
R: 'a,
source§fn pipe_borrow_mut<'a, B, R>(
&'a mut self,
func: impl FnOnce(&'a mut B) -> R
) -> Rwhere
Self: BorrowMut<B>,
B: 'a + ?Sized,
R: 'a,
fn pipe_borrow_mut<'a, B, R>(
&'a mut self,
func: impl FnOnce(&'a mut B) -> R
) -> Rwhere
Self: BorrowMut<B>,
B: 'a + ?Sized,
R: 'a,
source§fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> Rwhere
Self: AsRef<U>,
U: 'a + ?Sized,
R: 'a,
fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> Rwhere
Self: AsRef<U>,
U: 'a + ?Sized,
R: 'a,
Borrows
self, then passes self.as_ref() into the pipe function.source§fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> Rwhere
Self: AsMut<U>,
U: 'a + ?Sized,
R: 'a,
fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> Rwhere
Self: AsMut<U>,
U: 'a + ?Sized,
R: 'a,
source§impl<T> Pointable for T
impl<T> Pointable for T
source§impl<T> SaturatedConversion for T
impl<T> SaturatedConversion for T
source§fn saturated_from<T>(t: T) -> Selfwhere
Self: UniqueSaturatedFrom<T>,
fn saturated_from<T>(t: T) -> Selfwhere
Self: UniqueSaturatedFrom<T>,
source§fn saturated_into<T>(self) -> Twhere
Self: UniqueSaturatedInto<T>,
fn saturated_into<T>(self) -> Twhere
Self: UniqueSaturatedInto<T>,
Consume self to return an equivalent value of
T. Read moresource§impl<SS, SP> SupersetOf<SS> for SPwhere
SS: SubsetOf<SP>,
impl<SS, SP> SupersetOf<SS> for SPwhere
SS: SubsetOf<SP>,
source§fn to_subset(&self) -> Option<SS>
fn to_subset(&self) -> Option<SS>
The inverse inclusion map: attempts to construct
self from the equivalent element of its
superset. Read moresource§fn is_in_subset(&self) -> bool
fn is_in_subset(&self) -> bool
Checks if
self is actually part of its subset T (and can be converted to it).source§fn to_subset_unchecked(&self) -> SS
fn to_subset_unchecked(&self) -> SS
Use with care! Same as
self.to_subset but without any property checks. Always succeeds.source§fn from_subset(element: &SS) -> SP
fn from_subset(element: &SS) -> SP
The inclusion map: converts
self to the equivalent element of its superset.source§impl<T> Tap for T
impl<T> Tap for T
source§fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Selfwhere
Self: Borrow<B>,
B: ?Sized,
fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Selfwhere
Self: Borrow<B>,
B: ?Sized,
Immutable access to the
Borrow<B> of a value. Read moresource§fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere
Self: BorrowMut<B>,
B: ?Sized,
fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere
Self: BorrowMut<B>,
B: ?Sized,
Mutable access to the
BorrowMut<B> of a value. Read moresource§fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Selfwhere
Self: AsRef<R>,
R: ?Sized,
fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Selfwhere
Self: AsRef<R>,
R: ?Sized,
Immutable access to the
AsRef<R> view of a value. Read moresource§fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere
Self: AsMut<R>,
R: ?Sized,
fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere
Self: AsMut<R>,
R: ?Sized,
Mutable access to the
AsMut<R> view of a value. Read moresource§fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Selfwhere
Self: Deref<Target = T>,
T: ?Sized,
fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Selfwhere
Self: Deref<Target = T>,
T: ?Sized,
Immutable access to the
Deref::Target of a value. Read moresource§fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Selfwhere
Self: DerefMut<Target = T> + Deref,
T: ?Sized,
fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Selfwhere
Self: DerefMut<Target = T> + Deref,
T: ?Sized,
Mutable access to the
Deref::Target of a value. Read moresource§fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
Calls
.tap() only in debug builds, and is erased in release builds.source§fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
Calls
.tap_mut() only in debug builds, and is erased in release
builds. Read moresource§fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Selfwhere
Self: Borrow<B>,
B: ?Sized,
fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Selfwhere
Self: Borrow<B>,
B: ?Sized,
Calls
.tap_borrow() only in debug builds, and is erased in release
builds. Read moresource§fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere
Self: BorrowMut<B>,
B: ?Sized,
fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere
Self: BorrowMut<B>,
B: ?Sized,
Calls
.tap_borrow_mut() only in debug builds, and is erased in release
builds. Read moresource§fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Selfwhere
Self: AsRef<R>,
R: ?Sized,
fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Selfwhere
Self: AsRef<R>,
R: ?Sized,
Calls
.tap_ref() only in debug builds, and is erased in release
builds. Read moresource§fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere
Self: AsMut<R>,
R: ?Sized,
fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere
Self: AsMut<R>,
R: ?Sized,
Calls
.tap_ref_mut() only in debug builds, and is erased in release
builds. Read moresource§impl<S, T> UncheckedInto<T> for Swhere
T: UncheckedFrom<S>,
impl<S, T> UncheckedInto<T> for Swhere
T: UncheckedFrom<S>,
source§fn unchecked_into(self) -> T
fn unchecked_into(self) -> T
The counterpart to
unchecked_from.source§impl<T, S> UniqueSaturatedInto<T> for Swhere
T: Bounded,
S: TryInto<T>,
impl<T, S> UniqueSaturatedInto<T> for Swhere
T: Bounded,
S: TryInto<T>,
source§fn unique_saturated_into(self) -> T
fn unique_saturated_into(self) -> T
Consume self to return an equivalent value of
T.