Struct pallet_grandpa::pallet::Pallet

pub struct Pallet<T>(_);

The pallet implementing the on-chain logic.

Implementations

impl<T: Config> Pallet<T>

Methods for the ValidateUnsigned implementation: It restricts calls to report_equivocation_unsigned to local calls (i.e. extrinsics generated on this node) or that already in a block. This guarantees that only block authors can include unsigned equivocation reports.

pub fn validate_unsigned(
    source: TransactionSource,
    call: &Call<T>
) -> TransactionValidity

pub fn pre_dispatch(call: &Call<T>) -> Result<(), TransactionValidityError>

impl<T: Config> Pallet<T>

pub fn report_equivocation(
    origin: OriginFor<T>,
    equivocation_proof: Box<EquivocationProof<T::Hash, T::BlockNumber>>,
    key_owner_proof: T::KeyOwnerProof
) -> DispatchResultWithPostInfo

Report voter equivocation/misbehavior. This method will verify the equivocation proof and validate the given key ownership proof against the extracted offender. If both are valid, the offence will be reported.

pub fn report_equivocation_unsigned(
    origin: OriginFor<T>,
    equivocation_proof: Box<EquivocationProof<T::Hash, T::BlockNumber>>,
    key_owner_proof: T::KeyOwnerProof
) -> DispatchResultWithPostInfo

Report voter equivocation/misbehavior. This method will verify the equivocation proof and validate the given key ownership proof against the extracted offender. If both are valid, the offence will be reported.

This extrinsic must be called unsigned and it is expected that only block authors will call it (validated in ValidateUnsigned), as such if the block author is defined it will be defined as the equivocation reporter.

pub fn note_stalled(
    origin: OriginFor<T>,
    delay: T::BlockNumber,
    best_finalized_block_number: T::BlockNumber
) -> DispatchResult

Note that the current authority set of the GRANDPA finality gadget has stalled.

This will trigger a forced authority set change at the beginning of the next session, to be enacted delay blocks after that. The delay should be high enough to safely assume that the block signalling the forced change will not be re-orged e.g. 1000 blocks. The block production rate (which may be slowed down because of finality lagging) should be taken into account when choosing the delay. The GRANDPA voters based on the new authority will start voting on top of best_finalized_block_number for new finalized blocks. best_finalized_block_number should be the highest of the latest finalized block of all validators of the new authority set.

Only callable by root.

impl<T: Config> Pallet<T>

pub fn state() -> StoredState<T::BlockNumber>

State of the current authority set.

impl<T: Config> Pallet<T>

pub fn pending_change(
) -> Option<StoredPendingChange<T::BlockNumber, T::MaxAuthorities>>

Pending change: (signaled at, scheduled change).

impl<T: Config> Pallet<T>

pub fn next_forced() -> Option<T::BlockNumber>

next block number where we can force a change.

impl<T: Config> Pallet<T>

pub fn stalled() -> Option<(T::BlockNumber, T::BlockNumber)>

true if we are currently stalled.

impl<T: Config> Pallet<T>

pub fn current_set_id() -> SetId

The number of changes (both in terms of keys and underlying economic responsibilities) in the “set” of Grandpa validators from genesis.

impl<T: Config> Pallet<T>

pub fn session_for_set<KArg>(k: KArg) -> Option<SessionIndex>where
    KArg: EncodeLike<SetId>,

A mapping from grandpa set ID to the index of the most recent session for which its members were responsible.

TWOX-NOTE: SetId is not under user control.

impl<T: Config> Pallet<T>

pub fn grandpa_authorities() -> AuthorityList

Get the current set of authorities, along with their respective weights.

pub fn schedule_pause(in_blocks: T::BlockNumber) -> DispatchResult

Schedule GRANDPA to pause starting in the given number of blocks. Cannot be done when already paused.

pub fn schedule_resume(in_blocks: T::BlockNumber) -> DispatchResult

Schedule a resume of GRANDPA after pausing.

pub fn schedule_change(
    next_authorities: AuthorityList,
    in_blocks: T::BlockNumber,
    forced: Option<T::BlockNumber>
) -> DispatchResult

Schedule a change in the authorities.

The change will be applied at the end of execution of the block in_blocks after the current block. This value may be 0, in which case the change is applied at the end of the current block.

If the forced parameter is defined, this indicates that the current set has been synchronously determined to be offline and that after in_blocks the given change should be applied. The given block number indicates the median last finalized block number and it should be used as the canon block when starting the new grandpa voter.

No change should be signaled while any change is pending. Returns an error if a change is already pending.

pub fn submit_unsigned_equivocation_report(
    equivocation_proof: EquivocationProof<T::Hash, T::BlockNumber>,
    key_owner_proof: T::KeyOwnerProof
) -> Option<()>

Submits an extrinsic to report an equivocation. This method will create an unsigned extrinsic with a call to report_equivocation_unsigned and will push the transaction to the pool. Only useful in an offchain context.

Trait Implementations

impl<T> Benchmarking for Pallet<T>where
    T: Config + Config,

fn benchmarks(extra: bool) -> Vec<BenchmarkMetadata>

Get the benchmarks available for this pallet. Generally there is one benchmark per extrinsic, so these are sometimes just called “extrinsics”.

fn run_benchmark(
    extrinsic: &[u8],
    c: &[(BenchmarkParameter, u32)],
    whitelist: &[TrackedStorageKey],
    verify: bool,
    internal_repeats: u32
) -> Result<Vec<BenchmarkResult>, BenchmarkError>

Run the benchmarks for this pallet.

impl<T: Config> BoundToRuntimeAppPublic for Pallet<T>

type Public = Public

The RuntimeAppPublic this type is bound to.

impl<T: Config> Callable<T> for Pallet<T>

type Call = Call<T>

impl<T> Clone for Pallet<T>

fn clone(&self) -> Self

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<T> Debug for Pallet<T>

fn fmt(&self, fmt: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<T: Config> GetStorageVersion for Pallet<T>

fn current_storage_version() -> StorageVersion

Returns the current storage version as supported by the pallet.

fn on_chain_storage_version() -> StorageVersion

Returns the on-chain storage version of the pallet as stored in the storage.

impl<T: Config> Hooks<<T as Config>::BlockNumber> for Pallet<T>

fn on_finalize(block_number: T::BlockNumber)

The block is being finalized. Implement to have something happen.

fn on_idle(_n: BlockNumber, _remaining_weight: Weight) -> Weight

This will be run when the block is being finalized (before on_finalize). Implement to have something happen using the remaining weight. Will not fire if the remaining weight is 0. Return the weight used, the hook will subtract it from current weight used and pass the result to the next on_idle hook if it exists.

fn on_initialize(_n: BlockNumber) -> Weight

The block is being initialized. Implement to have something happen.

fn on_runtime_upgrade() -> Weight

Perform a module upgrade.

fn try_state(_n: BlockNumber) -> Result<(), &'static str>

Execute the sanity checks of this pallet, per block.

fn pre_upgrade() -> Result<(), &'static str>

Execute some pre-checks prior to a runtime upgrade.

fn post_upgrade() -> Result<(), &'static str>

Execute some post-checks after a runtime upgrade.

fn offchain_worker(_n: BlockNumber)

Implementing this function on a module allows you to perform long-running tasks that make (by default) validators generate transactions that feed results of those long-running computations back on chain.

fn integrity_test()

Run integrity test.

impl<T: Config> IntegrityTest for Pallet<T>

fn integrity_test()

Run integrity test.

impl<T: Config> OffchainWorker<<T as Config>::BlockNumber> for Pallet<T>

fn offchain_worker(n: <T as Config>::BlockNumber)

This function is being called after every block import (when fully synced).

impl<T: Config> OnFinalize<<T as Config>::BlockNumber> for Pallet<T>

fn on_finalize(n: <T as Config>::BlockNumber)

The block is being finalized. Implement to have something happen.

impl<T: Config> OnGenesis for Pallet<T>

fn on_genesis()

Something that should happen at genesis.

impl<T: Config> OnIdle<<T as Config>::BlockNumber> for Pallet<T>

fn on_idle(n: <T as Config>::BlockNumber, remaining_weight: Weight) -> Weight

The block is being finalized. Implement to have something happen in case there is leftover weight. Check the passed remaining_weight to make sure it is high enough to allow for your pallet’s extra computation.

impl<T: Config> OnInitialize<<T as Config>::BlockNumber> for Pallet<T>

fn on_initialize(n: <T as Config>::BlockNumber) -> Weight

The block is being initialized. Implement to have something happen.

impl<T: Config> OnRuntimeUpgrade for Pallet<T>

fn on_runtime_upgrade() -> Weight

Perform a module upgrade.

fn pre_upgrade() -> Result<(), &'static str>

Execute some pre-checks prior to a runtime upgrade.

fn post_upgrade() -> Result<(), &'static str>

Execute some post-checks after a runtime upgrade.

impl<T> OneSessionHandler<<T as Config>::AccountId> for Pallet<T>where
    T: Config + Config,

type Key = Public

The key type expected.

fn on_genesis_session<'a, I>(validators: I)where
    I: Iterator<Item = (&'a T::AccountId, AuthorityId)> + 'a,

The given validator set will be used for the genesis session. It is guaranteed that the given validator set will also be used for the second session, therefore the first call to on_new_session should provide the same validator set.

fn on_new_session<'a, I>(changed: bool, validators: I, _queued_validators: I)where
    I: Iterator<Item = (&'a T::AccountId, AuthorityId)> + 'a,

Session set has changed; act appropriately. Note that this can be called before initialization of your module.

fn on_disabled(i: u32)

A validator got disabled. Act accordingly until a new session begins.

fn on_before_session_ending()

A notification for end of the session.

impl<T: Config> PalletInfoAccess for Pallet<T>

fn index() -> usize

Index of the pallet as configured in the runtime.

fn name() -> &'static str

Name of the pallet as configured in the runtime.

fn module_name() -> &'static str

Name of the Rust module containing the pallet.

fn crate_version() -> CrateVersion

Version of the crate containing the pallet.

impl<T: Config> PalletsInfoAccess for Pallet<T>

fn count() -> usize

The number of pallets’ information that this type represents.

fn infos() -> Vec<PalletInfoData>

All of the pallets’ information that this type represents.

impl<T> PartialEq<Pallet<T>> for Pallet<T>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<T: Config> StorageInfoTrait for Pallet<T>

fn storage_info() -> Vec<StorageInfo>

impl<T: Config> ValidateUnsigned for Pallet<T>

type Call = Call<T>

The call to validate

fn validate_unsigned(
    source: TransactionSource,
    call: &Self::Call
) -> TransactionValidity

Return the validity of the call

fn pre_dispatch(call: &Self::Call) -> Result<(), TransactionValidityError>

Validate the call right before dispatch.

impl<T> Eq for Pallet<T>